Laser rust cleaning machine is a kind of equipment for laser cleaning and rust removal. In the process of use, strict spot inspection is essential for maintaining machine performance and ensuring equipment safety. This article aims to provide you with a complete laser rust cleaning machine spot inspection standards.   First of all, we need to confirm that the power supply and switch of the laser rust cleaning machine are normal. After turning on the machine, check whether the power indicator of the device is on, whether the switches can be switched on and off normally, and whether the control system works normally. Secondly, it is necessary to check whether the laser of the laser cleaning machine works normally. Check whether the power supply of the laser is normal, whether the laser has obvious damage or fault, and whether the optical path of the laser is normal.   Next, we need to check whether the cooling system of the laser rust cleaning machine is working properly. Check whether the cooling system fan is working properly, whether the coolant is sufficient, and whether the cooling system is leaking or blocked. If the cooling system fails, it may cause the laser to overheat, which will affect the normal operation of the device.   Then, we need to check whether the dust suction device of the laser rust cleaning machine is working normally. Check whether the suction of the suction device is sufficient, whether the suction port is blocked, and whether the suction device has air leakage. If the dust suction device fails, it may lead to the dirt generated during the laser cleaning process can not be effectively recovered, thus affecting the cleaning effect of the equipment.   Finally, we need to check whether the optical components of the laser rust cleaning machine are clean. Check the optics for dust or dirt, and for damage or distortion. If the optical c